PEAK #2054-EIM Microscope+

The advantage of the PEAK 2054-EIM Measuring Microscope in comparison to the standard 2054 series is that the image of the object to be measured is not reversed. An additional prism reverses the light beam inside the microscope. This upright image of the inspection point facilitates finding flaws. The 2054-EIM series microscopes are particularly suitable for inspecting paint finishes in the automotive industry. Quick focusing with hand wheel and rack-and-pinion drive provides a significant advantage on active production lines. A sturdy aluminium base ensures stability even for the standard version, but if desired an acrylic base is available to improve the visibility of the point to be checked.

Four types of lenses are available: 2x, 4x, 6x and 10x. The eyepiece has a magnification factor of 10x and the focal plane is equipped with a scale. Contamination of the scale with dust is not possible thanks to the Huygens design with focal plane in the lens system. The lens closest to the eye in the ocular can be moved by turning the adjustment ring, so that the scale can be adjusted to match the eye correction of the observer. The eyepieces associated with each magnification factor (objective lense) can be replaced by simply pulling out. If additional lenses are to be used for visually checking purposes only then additional eyepiece are not required, otherwise it is important to order the associated eyepiece with each additional lense.

The side illumination allows measurements on dark surfaces or in darkened rooms. Two 1.5 Volt AA batteries are required for operation. The microscope is supplied in a padded transport box offering secure transport space for four additional lenses available as accessories.